Sound Pressure; Maintenance And Storage; Sound Power - Toro 51581 Manual Del Operador

•
This appliance is provided with double insulation (i.e.,
Class 2 device). Use only identical replacement parts.
See instructions for servicing of Double-Insulated (Class 2)
appliances.
•
Lightning can cause severe injury or death. If lightning is seen
or thunder is heard in the area, do not operate the machine;
seek shelter.

Maintenance and Storage

•
Keep all nuts, bolts, and screws tight to be sure the appliance
is in safe working condition.
•
Check the vacuum bag frequently for wear or deterioration.
•
Replace worn or damaged parts.
•
If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to
a service dealer.
•
Use only genuine replacement parts and accessories.
•
Store the appliance in a dry place.
Waste of Electrical/Electronic Equipment (WEEE)
• EU directive 2002/96/EC classifies this product as an electrical or electronic tool.
• Do Not dispose of this tool as unsorted municipal waste.
• Dispose of this tool at a collection or recycling center according to local and national law.
• The consumer has an important role in reducing the disposal of waste by returning waste electronic/electrical
tools for recycling.
• Recycling avoids the dispersion of hazardous materials into the municipal waste stream.
• The crossed-out bin symbol reminds the user not to dispose of this product as unsorted municipal waste.

Sound Pressure

This unit has a sound pressure level at the operator's ear of 93
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Sound pressure level was determined according to the procedures
outlined in EN ISO 11201.

Sound Power

This unit has a guaranteed sound power level of 102 dBA, which
includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the procedures
outlined in ISO 11094.
Vibration
•
Measured vibration level = 2.4 m/s
•
Uncertainty Value (K) = 1.0 m/s
Measured values were determined according to the procedures
outlined in EN ISO 20643.
2
2
2