Display Settings - Blackmagic Design Pocket Cinema Camera Manual De Instalación Y Operación

Settings
24
Display Settings screen on Cinema Camera and
Production Camera 4K
SDI/HDMI Overlays set to display on an external monitor

Display settings

To adjust the display settings for the LCD, press the MENU button and select the television icon.
Dynamic Range
The LCD allows you to view your video as you are recording. You can set the dynamic range of
the LCD by selecting Video or Film.
The dynamic range setting of the LCD is independent to the dynamic range set in the recorder
settings. Some people prefer to monitor video with the LCD set to Video even when the recording
format is set to Film.
Adjust the dynamic range setting of the LCD using the arrow icons in the menu.
Brightness
Move the slider icon left or right to adjust brightness settings for the LCD.
Zebra
Blackmagic Cameras have a zebra feature which gives an indication of exposure levels. Diagonal
lines will appear across any part of the video that exceeds the zebra exposure level.
Turn zebra on and select the desired zebra warning level by using the left and right arrows.
SDI/HDMI Overlays
You can monitor your video on an external display using the HDMI port on Pocket Cinema Camera,
or the SDI port on Cinema Camera and Production Camera 4K.
The SDI or HDMI Overlays setting lets you display useful information on your monitor. Use the
arrow icons to select which overlays to display on your SDI or HDMI feed.
All: displays both frame guides and recording information.
Status: displays only the recording information, such as f-stop number, frame rate, battery life etc.
Guides: displays only the frame guides.
Off: gives you a clean feed.