TEFAL Ultrablend Boost BL985A31 Manual Del Usuario página 136

Manual functions
The manual functions can be used in addition to program mode.
Clean : allows you to clean your appliance with 150 ml water and 1
•
drop washing up liquid. Press Clean button. The duration is 30 seconds.
The longest working time cannot be more than 3 minutes.
• Blend : allows you to freely control the way you want to blend.
Press the blend button, the screen indicates « P » corresponding
to the pulse function but you can choose the blending speed
from 1 to 9 by pressing the setting +/- button (L). «H» is the maximum
speed. Then press start/stop button. You can set up the working time by
pressing the setting +/- button (L) between 5 seconds and 3 minutes.
The remaining time appears on the screen. Wait for the blender to stop
automatically. The appliance beeps 3 times.
• Vacuum : Before using the vacuum function, lock the lid cap by rotating
it in such a way that the arrow on the lid cap is aligned with the «air out»
pictogram
select an automatic program (compatible with smoothie and milkshake
programs). At the end of the program, press the vacuum button in the
middle of the lid cap to remove the lid and pour your preparation.
OTHER FUNCTIONS
• Press the «Start/stop» button to pause the program. You can pause your
appliance up to 5 minutes, after which the appliance returns to the
home screen.
• If you keep pressing the «Start / Stop» button for 3 seconds, the
appliance beeps 3 times before going into «Stand by» mode. No more
button lights are visible except the «Start / Stop» button.
Overload protection
• The appliance is equipped with overload protection. This prevents the
motor from being damaged by overloading.
• If the appliance switches off during operation, proceed as follows :
– Switch the appliance off using the start/stop button, unplug and leave
it to cool down for approximately 15-20 minutes.
– Reconnect the appliance to the power supply and resume blending.
• Cancel : You can stop the blending during the cycle by pressing the
«cancel» logo. The appliance stops and returns to the home screen.
136
. Begin vacuum process. After 1min10s, you will be able to