Preparation; Supplied As Standard; Set-Up And Connection; Warming Cups (Manual Switch-On) - Jura 571 Modo De Empleo

JURA Cup Warmer
1

Preparation

Supplied as standard

The following items are supplied as standard:
Z
JURA Cup Warmer
Z
Instructions for use
Z
Mains cable

Set-up and connection

When setting up your cup warmer, observe the
following:
Z
Set the machine down on a horizontal surface.
Z
Choose a spot for the machine which is
protected against overheating.
J
WARNING
If the machine is operated with a defective mains
cable, there is a danger of electric shock.
T
Never use a machine which has a defective
mains cable.
T
Carefully turn the machine upside down and
set it down.
T
Connect the mains cable to the machine.
E
Spare cable can be stored on the underside
of the cup warmer depending on the length
of cable required.
T
Set the machine down the right way up
again.
T
Insert the mains plug into a power socket.
OFF is displayed below the cover.
16

2 Warming cups (manual switch-on)

J
Risk of burns. The storage surfaces in the
cup drawers can get hot during operation.
T
Do not touch the storage surfaces in the cup
drawers.
T
Open a cup drawer.
T
Place the cups in the cup drawer and close it.
T
Place the cups or glasses on the cup tray on
the top of the machine.
Q T
Switch the machine on with the on/off
button.
The operation indicator lamp lights up and
the machine starts to warm the cups. ON is
displayed below the cover.
E
When you want to switch off the machine,
press the on/off button Q. The operation
indicator lamp goes out and OFF is
displayed.
E
If the "Automatic switch-off" function is not
activated, the machine will switch off after
12 hours to save energy.

3 Automatic switch-on / switch-off

E
If the machine is disconnected from the
mains, all settings are reset.

Setting the time

For the 'automatic switch-on / switch-off' function,
you must first set the time:
T
Open the cover.
T
Press the Clock button.
AM 12:00 appears on the display.
T
Press one of the arrow buttons to change
the time format (AM/PM or 24h).
T
Press the Clock button to confirm the time
format.
00:00 (example), the hours flash.
T
Use the arrow buttons to set the hours.