Philips Jack Wet/Dry FC6082/01 Manual De Instrucciones página 8

ENGLISH
8
C
C
C
3 Wind excess mains cord and store it in
the charging unit.
Charging
Charge the appliance for at least 16 hours before
you use it for the first time.
Recharge the appliance as soon as the motor
power decreases noticeably.
1 Make sure that the slide switch of the
vacuum cleaner is in off position (0) during
charging. The appliance will not charge if
the slide switch is in another position.
2 Insert the adapter into the wall socket.
3 Always put the vacuum cleaner back onto
the charging unit after use to recharge the
batteries, even if the batteries are still
almost fully charged.
The indicator light will come on to indicate
that the appliance is charging.
The indicator light will stay on as long as the
B
appliance is connected to the charging unit and
the adapter is in the wall socket.
The indicator light does not give any information
B
about the charge level of the built-in batteries.