At-S26 Software Default Setting - Allied Telesyn AT-9006SX/SC Guía De Instalación Rápida

AT-S26 Software Default Setting

Table 4 lists the default settings for the AT-S26 software that comes pre-
installed on the Ethernet switch.
Settings
IP Address
Subnet Mask
Gateway Address
Get Community String
Set Community String
Trap Community String
Spanning Tree Protocol
Bridge Priority
Bridge Max Age Time
Bridge Hello Time
Bridge Forwarding Delay
Telnet Access
System Name
Omega Password
Omega Time-out Value
Download Password
Duplex Mode 10/100Base-TX Ports
Duplex Mode 100Base-FX Ports
Duplex Mode 1000Base-SX Ports
Active Aging Time (MAC Address Table)
High Port Speed
Domain Name
VLAN Name
PVID/VID
10
Table 4 Ethernet Switch Default Settings
Default
0.0.0.0
0.0.0.0
0.0.0.0
public
private
public
Disabled
32768
20
2
15
Enabled
None
No password assigned
5 minutes
ATS26
Auto-negotiating
Full-duplex
Full-duplex
300 seconds
Auto-negotiating
None
Default VLAN (all ports)
1