Reviewing Safety Guidelines - Allied Telesyn AT-9006SX/SC Guía De Instalación Rápida

Reviewing Safety Guidelines

Please review the following safety guidelines before you begin to install the
Ethernet switch.
Warning
Class 1 laser product.
Warning
Do not stare into the laser beam.
Warning
Electric Shock Hazard: To prevent electric shock, do not remove the
cover. There are no user-serviceable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and
qualified technician.
Warning
Lightning Danger: Do not work on this equipment or cables during
periods of lightening activity.
Warning
Power cord is used as a disconnection device: To de-energize
equipment, disconnect the power cord.
Warning
Electrical-Type Class 1 Equipment: This equipment must be
earthed. The power plug must be connected to a properly wired earth
ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts.
Caution
Pluggable Equipment: The socket outlet should be installed near the
equipment and should be easily accessible.
Caution
Air vents: The air vents must not be blocked on the unit and must have
free access to the room ambient air for cooling.
!
6
!
7
!
8
!
9
AT-9006 Quick Install Guide
!
10
!
11
!
12
!
13
3