Introduction; Using For The First Time; Installing The Parrot Mk6000 - Parrot MK6000 Guia Del Usuario

IntRoDUCtIon

The Bluetooth® technology enables voice and data to be sent via a short-distance radio link.
It allows several electronic devices to communicate with each other, particularly phones and
hands-free kits.
Parrot is drawing on its long years of experience in signal processing and voice recognition
technology to offer a hands-free kit with superior audio quality during calls. The Parrot MK6000
is the first hands-free kit to incorporate the Beamforming technique by means of a double
microphone. This technology allows for greater call quality and improved noise reduction.
With the Parrot MK6000, you will be able to make phone calls from your car while keeping your
hands on the wheel. You can also use the streaming audio function on your hands-free kit to
listen to the music files on your phone, PDA or audio player over your vehicle's speakers (if your
phone, PDA or audio player supports the streaming audio function). It acts as a real extension of
your mobile phone
KIt Contents
• Control keypad
• Installation cables
• Electronic control unit
• Double microphone
• User guide
UsInG FoR tHe FIRst tIMe
InstallInG tHe PaRRot MK6000
Prior to fixing the hands-free kit's different components inside the car, connect the installation
cables, control keypad and double microphone to the electronic control unit.
Remove the original connectors from your vehicle's audio system.
The cables supplied with the kit feature «ISO» connectors and two pairs of line-out jacks. The
line-out jacks can be used if your audio system features this option (use of an amplifier).
Several set-ups are therefore possible, depending on the type of car stereo and your vehicle:
Parrot MK6000