Documents - Legamaster FLIPBOX Manual Del Usuario

Custom network name (e. g. use «flipbox.lan» if DNS name is assigned to this PC) - create a link to connect. The
record should be created in advance on the DNS-server.
Warning! If there are no available connections, then there will be a message "Please, connect to the network
via Wi-Fi or Ethernet". Follow the steps to work correctly Flipbox Software Suite.
Error: Broadcasting name is incorrect or Vnc site is incorrect
Solution: Make sure that the Flipbox name is entered correctly and does not use symbols < > ' "&.
Error: The password of a Wi-Fi network must be more than 8 and less than 63 symbols
Solution: Make sure that the password is entered correctly.
2.5.2. Guest network
Test if your PC supports network feature - to test if access point feature is supported press button «Test».
Warning!
Test if guest network feature is supported may take some time. After the test is finished, setup program will
inform on results: «Guest network feature is supported» or «Guest network feature is not supported». After
successful test, guest network feature is enabled.
Enable guest network (Flipbox restart is required) - enabling the access point.
Network name (SSID) - name of the network provided.
Password - password, if required.
2.5.3. Connection security
Require a password when connecting a device with Microsoft Windows Client Operating System and eliminate the
possibility to connect to a wrong Flipbox.

2.6. DOCUMENTS

Add link to Document folder to Flipbox
homescreen – to add the selected folder to the home
screen. To select the folder, press «Browse».
If Flipbox Software Suite was launched, it needs to be
re-started to apply changes of this setting.
FLIPBOX – ADMINISTRATOR MANUAL – ENGLISH
SETUP
11