Setup; The Beginning And The End Of Work; General; Language Selection - Legamaster FLIPBOX Manual Del Usuario

«Desktop» allows the user to go to the
Microsoft Windows mode.
«Shutdown» turn off the display or
computer (depending on
settings, chapter 2.2.2.
Turn off).
«Clear the memory» allows you to remove all the
temporary data from Flipbox
Software Suite.
«Setup» starts FlipboxAdmin – a Flipbox
Software Suite setup program.

2. SETUP

2.1. THE BEGINNING AND THE
END OF WORK
FlipboxAdmin sets up the Flipbox Software Suite.
The administration program can be launched in
two ways: from the Microsoft Windows desktop or
from the Flipbox Software Suite home screen – the
Setup button.

2.2. GENERAL

2.2.1. Language selection

It enables you to choose between Russian and English.
If Flipbox Software Suite was launched, it needs to be
re-started to apply changes of this setting.

2.2.2. Display resolution

• Allows to set up display resolution for the Flipbox
mode:
• Full HD - photo and video view is available in Ultra
HD format (if characteristics of the display permit).
• Ultra HD
• Windows Default resolution (not recommended as
display the correct data is not guaranteed).
Attention!
If the display does not support the chosen parameter
(FullHD or Ultra HD), Windows Default resolution
will be used.
INSTALLATION AND ACTIVATION / SETUP
Warning!
We strongly recommend saving all the
necessary data before beginning the startup
process. When settings are applied, the
memory will be cleared.
To save and apply all changes made in settings,
press Apply. FlipboxAdmin will ask you «Do you
really want to apply changes?», press «Yes» to
apply settings.
When closing the program, the FlipboxAdmin
will show a message «Settings Flipbox could be
changed. Apply changes?» press «Yes» to apply
settings.
2.2.3. Shutdown
Show shutdown button on the main screen allows
to show or hide the shutdown button.
2.2.4. User-defined restrictions
FLIPBOX – ADMINISTRATOR MANUAL – ENGLISH
7