ProMed PBW- 5.2 Instrucciones De Empleo página 28

OPERATING THE UNIT
Note:
If, for any reason (e.g. feeling unwell), it is necessary to interrupt the
blood pressure measurement, this can be done by pressing the START
/ STOP button User 1
(B) depending on which user you are. The armlet pressure is then
lowered immediately and the measurement is stopped.
When the device has built up enough pressure in the armlet,
it automatically stops inflating and starts deflating. The actual
measuring process starts. As soon as the device can measure a pulse
rate, the pulse rate display
following appears on the display: the deflate symbol (13) and the
blood pressure analysis display (15).
When the measurement is finished, the systolic and diastolic pressure
as well as the pulse rate are displayed and saved. In addition, the
DE
measurement result based on the WHO scale is displayed on the
blood pressure analysis display (15).
The armlet is now deflated until any residual air has escaped and the
EN
system is completely empty.
FR
To switch off the device, press START / STOP button User 1
User 2 (B), depending on which user you are.
IT
ES
NL
RU
PL
SE
FI
(A) or the START / STOP button User 2
(8) starts flashing. In addition, the
28
(A) or START / STOP button