Zyxel SSL 10 Guia De Inicio Rapido página 7

2 Create a Web Application and enter a
descriptive name in the Service Name field.
3 In the Address field, enter the address of the
server. For example, http://192.168.1.200.
4 Select Web Server in the Server Type field.
5 If you use a non-standard port number (for
example, 8080 instead of 80), enter it in the
Virtual Web Port field.
6 Click Ok to save the settings.
7 Click SSL in the navigation panel and
click the Edit icon to configure the
"default" SSL policy you created using
the setup wizard.
8 In the configuration screen that displays, select
the name of the SSL application you have just
created and click Ok to save the settings.
This applies the application setting to the SSL
policy and allows the remote user to access the
server over an SSL-VPN connection.
9 Make sure the server is configured properly and
connected to the local network.
6 Test Remote User Connection From the Internet
Follow the steps below to access the local network as a remote user from the Internet. You
must know the WAN IP address of the ZyWALL (get this information in the Status screen).
1 Connect your computer to a network outside your company firewall.
2 Open your web browser and enter the WAN IP address of the ZyWALL as the URL.
3 Click OK or Yes if a security screen displays.
ENGLISH
7