Front Panel Leds; Mdi/Mdi-X Button - Allied Telesyn AT-FS709 Guia De Instalacion

Front Panel LEDs

Figure 2 illustrates the switch front panel LEDs. Table 2 lists and describes
these LEDs.
100Mbps
1 2 3 4 5 6
LEDs Color
100 Mbps GREEN
LINK GREEN
ACTIVITY GREEN
POWER GREEN

MDI/MDI-X Button

Port 1 is associated with the MDI/MDI-X button, and is described in Table 3.
The button gives you the flexibility to use a straight-through cable to connect
to a hub or another switch, or to any DTE such as an end station or a server.
Position
MDI
In
MDI-X
Out
10BASE-T/100BASE-TX NETWORK PORTS
7 8 9
1 2 3
Figure 2 A Close Up of the Front Panel LEDs
Table 2 LED Status
State Description
OFF Means the port connection speed is 10 Mbps
ON Means the port connection speed is 100 Mbps
Applies to all ports on the switch
ON Indicates a valid physical link on the port
ON Indicates data is being transmited
OFF Means there is no power to the switch
ON Means there is power to the switch
Table 3 MDI/MDI-X Button Positions
Label
= HUB
x PC
ACTIVITY
LINK
4 5 6 7 8 9
To connect a hub or another switch to the port
To connect a DTE to the port
AT-FS709 Installation Guide
STATUS
POWER
Use
3