Name And Function Of Each Component - Sanyo HD2500 Manual De Instrucciones

Name and Function of Each Component

■
Rear Face
①
①
SD (SDHC) Card Slot (VCC-HD2500P/HD2500)
②
Audio Output Jack (AUDIO OUT, 3.5-mm mini jack) (VCC-HD2500P/HD2500)
③
Power Indicator (POWER)
The power indicator blinks to indicate the following camera statuses.
•
Recording to SD memory card stopped/camera is recognizing SD memory card/
An error occurred
•
Firmware update in progress
④
Power Terminals (24 V AC/12 V DC)
⑤
Audio Input Jack (AUDIO IN, 3.5-mm mini jack) (VCC-HD2500P/HD2500)
⑥
Network Socket (LAN, RJ-45)
Ⓐ Access indicator
Ⓑ Speed indicator
Ⓐ Ⓑ
⑦
Control Terminals (ALARM IN/OUT: 6 push-lock pins)
These terminals can be used as alarm input or Day/Night switching terminals.
⑧
Monitor Output Socket (MONITOR OUT)
②
③
④
•
Lights: Connection has been established between the camera
and the network.
•
Blinks: Data are being transmitted via the network.
•
Lit: 100BASE-TX
•
Unlit: 10BASE-T
CLASS 2
WIRING
AUDIO
DC12V
2
⑤
⑥
⑦
⑧