EHEIM autofeeder+ Manual De Instrucciones página 24

English
1. Remove the protective film of the adhesive securing point
2. Place the automatic feeder on the aquarium cover.
Installing the automatic feeder – open aquariums (⌦D/E)
1. Fasten the terminal
2. Place the plate
3. Remove the protective film of the adhesive securing point
4. Place the automatic feeder on the plate.
Filling the feed drum (⌦F)
1. Remove the drum unit from the drive unit.
2. Remove the cover
3. Fill the feed drum with feed up to the max marking.
Only use standard flake food or feed granulate. The following feed types must never be used: Large flakes, sticks,
feed tablets, frozen and wet feed or live feed.
4. Put the cover back.
5. Reconnect the drum unit to the drive unit.
Operation with WLAN connection
System requirement
WLAN-enabled terminal device (smartphone, tablet, notebook etc.)
Creating the network
1. Insert the switching power supply unit in the mains socket. The status LED
‧ The status LED flashes white: The network is being searched for or created
‧ The status LED illuminates blue: A new network has been created (master mode)
by turning the plastic nut

in the correct position on the terminal.

from the feed drum

.

on the pool edge of the aquarium.

.

.

24
in the touch field illuminates.
 