Connecting An Audio System; Connecting An A/V Amplifier With Built-In Digital Surround - Toshiba FST PURE 26HF66 El Manual Del Propietario

Connecting an audio system

This connection allows you to use external speakers with an external
audio amplifier to adjust the sound level.
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV's built-in speakers (see "Turning off the built-in
speakers" on page 38).
Note: To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set to a reasonable
listening level.
Back panel of TV

Connecting an A/V amplifier with built-in digital surround

This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
See "Selecting the digital output format" on page 39.
Back panel of TV
AV Amplifier with built-in digital surround
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver's inputs.
Consult the owner's manual for your receiver to determine the best way to switch between the analog and digital signals.
J3W60321A_En_p07-14 14
You will need:
• one pair of standard audio cables
You will need:
• one coaxial digital cable
• Six sets of speaker cables
Note:
Refer to the Owner's manual of the audio
amplifier as well.
Front
Speaker
(Left)
Surround Speaker
(Left)
14
27/2/06, 9:54 AM
Amplifier
LINE IN
L R
Front
Subwoofer
TV
Speaker
(Right)
Center Speaker
Surround
Speaker (Right)