Connecting Your Tv; Connecting A Vcr - Toshiba 14AF46 Manual Del Propietário

Connecting your TV

• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F" connectors.
• Standard A/V (audio/video) cables are usually color coded accord-
ing to use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
• An S-video cable provides better picture performance than a
standard video cable. S-video cables can only be used with S-video
compatible components.
• Component video cables come in sets of three and provide the best
picture performance. Component video cables can only be used
with component video compatible components.
ANTENNA
Coaxial Cable
AUDIO
Cables
VIDEO
Cable

Connecting a VCR

This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
ANT (75Ω)
S-VIDEO
Cable Lead-in
from cable box
or antenna
IN from ANT
CH 3
CH 4
J3S10321A(E)_P07-13
S-Video
Cable
Component video
Cables
TV
IN
Y
VIDEO
P
B
L/
MONO
AUDIO
P
R
R
VIDEO 1
Stereo VCR
IN
OUT to TV
OUT
L
VIDEO AUDIO
7
You will need:
• two coaxial cables
• one set of standard A/V cables
Note:
If using a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
For better picture quality, if your VCR has S-
video, you can use an S-video cable instead
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDEO1 simultaneously.
The unauthorized recording, use, distribu-
tion or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
R
7
21/12/05, 12:30 PM
NOTICE: RISK OF
EQUIPMENT DAMAGE!
Do not plug in any power cords
until you have finished connecting
all equipment.