Asus Crosshair II Guia De Instalacion página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 501
1.7
Installing disk drives
1.7.1
PATA optical disk drive
1.
Remove the dummy cover and
slide the optical disk drive into the
bay.
3.
Orient and plug the IDE cable into
the optical drive. The red stripe on
the IDE cable is the pin1 end and
should match the dimple marking
Pin1 on the optical drive.
IDE cables are dummy-proof. Never force the IDE cable into the connector.
4.
Connect the 4‑pin power cable to
the optical drive.
ASUS Motherboard installation guide
2.
Align the screws holes and secure
the disk drive with screws.
5.
Attach the audio cable to the
connector on the optical drive.
1

Publicidad

Tabla de contenido
loading

Tabla de contenido