Talk Function; Battery Empty - Philips AVENT SCD560 Manual Del Usuario

Ocultar thumbs Ver también para AVENT SCD560:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
EngliSh
8
Battery status light
1
The battery status light is solid green when the baby unit runs on battery power and the
batteries contain enough energy.
2
The battery status light flashes red quickly when the batteries run low while the baby unit is
running on battery power.
-
Replace the batteries when they run low.
Functions and feedback on the parent unit
volume
The volume can be set if the menu is not active. There are seven volume levels and a 'volume off ' setting.
Setting the volume level
1
Press the + button or the - button once.
The current volume level appears on the display.
,
2
Press the + button to increase the volume or press the - button to decrease the volume.
If no button is pressed for more than 2 seconds, the volume level indication disappears and
,
the volume setting is saved.
volume off
Below the lowest volume setting, there is a 'volume off ' setting.
1
Press the + button or the - button once.
The current volume level appears on the display.
,
2
Press and hold the - button for more than 2 seconds to set the volume to off.
The message 'MUTE' and the mute symbol appear on the display (Fig. 6).
,
Note: If the volume is off, only the sound level lights show that the baby produces sounds.

talk function

1
If you want to comfort your baby, press TALK on the parent unit and talk clearly into the
microphone on the front from a distance of 15-30cm (0.5-1ft) (Fig. 7).
Note: If you have set the volume for the lullaby higher on the baby unit, the sound will also be louder
when you use the talk function on the parent unit.
The 'link' light starts flashing green and the message 'TALK' appears on the display.
,
2
Release TALK when you have finished talking.
Battery status indications
The battery charge status is indicated on the display by the battery status indicator and by text
messages.
Battery low
When the rechargeable batteries are low, 'BATTERY LOW' appears on the display, the battery status
indicator is empty and flashes, and the parent unit beeps. The remaining operating time is at least
30 minutes.

Battery empty

1
If the rechargeable batteries are almost empty, the battery status light flashes red quickly (Fig. 8).
2
If you do not connect the parent unit to the mains, it switches off.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Avent scd570

Tabla de contenido