Replacing The Filters; Protecting The Environment - BLACK&DECKER HFEJ415JWMF22 Manual De Instrucciones

2 en 1 aspiradora inalámbrica con mango con extensión para piso
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12 • ENGLISH
Place filters back into the bowl pressing firmly to ensure
a secure fit.
To replace dust bowl, place it back onto the handle until it
"clicks" firmly into position.
IMPORTANT: Maximum dust collection will only be
obtained with a clean filter and an empty dust bowl. If dust
begins to fall back out of the product after it is switched off,
this indicates that the bowl is full and requires emptying.
Wash the filters regularly using warm, soapy water
and ensure that they are completely dry before using
again. The cleaner the filter is, the better the product
will perform.
It is very important that the filter is correctly in position
before use
SCENTED FILTER
BEFORE FIRST USE - remove bag from the scented
pre-filter. Reassemble per instructions above. When the
vacuum is turned on, the plastic scented filter will emit an
aroma to freshen the air.
ADVERTENCIA:
Causes mild skin irritation
Toxic to aquatic life
Harmful to aquatic life with long lasting effects.
Dispose of contents/ containers to an approved waste
disposal plant.
NOTA: Cuando el filtro de plástico perfumado deje de
desprender aroma, puede ser una indicación de que debe
cambiarse el filtro. Mire a continuación la información
sobre los filtros de repuesto.
NOTE: When the plastic scented filter no longer lets off
the aroma, it can be an indication that the filter needs to be
replaced. See below for information on replacement filters.

REPLACING THE FILTERS

The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your Black+Decker dealer.
Catalog numbers:
Scented plastic pre-filter: VSPF10XX*
Pleated filter: VPF20
* XX is a placeholder for the two-digit number that indicates
the plastic scented filter's specific scent.
MAINTENANCE
Bowls and filters can be washed thoroughly; however, use
only mild soap and a damp cloth to clean the main part of
the vacuum. Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed
by authorized service centers or other qualified service
personnel, always using identical replacement parts.
DETECCIÓN DE PROBLEMAS
If the product does not work, follow the instructions below.
If this does not solve the problem, please contact your local
BLACK+DECKER repair agent.
Unit will not start. Battery not charged
Check battery charging requirements.
Battery will not charge. Charger not plugged in
Plug charger into a working outlet. Refer to "Important
Charging Notes" for more details.
Check current at receptacle by plugging in a lamp or
other appliance.
Check to see if eceptacle is connected to a light switch
which turns power off when you turn out the lights.
Battery will not charge. Surrounding air temperature
too hot or too cold
Move charger and tool to a surrounding air temperature
of above 40 degree F (4,5°C) or below 105 degree F
(+40,5°C).

PROTECTING THE ENVIRONMENT

Separate collection. This product must
not be disposed of with normal household
waste. Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and used
again. Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide
for separate collection of electrical products from
the household, at municipal waste sites or by the
retailer when you purchase a new product.
The instructions for appliances incorporating a battery that
contains materials that are hazardous to the enviroment
shall give details on how to remove the battery and shall
state that:
1. The battery must be removed from the appliance
before it is scrapped.
2. The appliance must be disconnected from the supply
mains when removing the battery.
3. The battery is to be disposed of safety.

Publicidad

Tabla de contenido
loading

Tabla de contenido