Cleaning The Lens - GoPro HERO9 BLACK Guia Del Usuario

Navigating with the Buttons
1. With the camera powered on, hold down the Mode button
Shutter button .
2. Use the Mode button to cycle through the presets.
3. Press the Shutter button to select a preset.
4. To exit, press and hold the Shutter button, or cycle to Done in the menu.
and press the
Cleaning Your Housing

CLEANING THE LENS

Keep the lens clean by wiping it with a soft, damp cloth if it comes in
contact with food, lotion, ink, or anything that could cause a stain. Do not
use window cleaners, household cleaners, solvents, alcohol, or anything
abrasive.
CLEANING THE RUBBER SEAL
A single hair or grain of sand on the housing's seal can cause a leak that
may impact image and sound quality. Clean the seal by removing it from the
housing, rinsing it in fresh water, and shaking it dry (drying it with a cloth may
cause lint to damage the seal). After using the housing in salt water, rinse it
with fresh water to prevent corrosion.