Dockin D MATE DIRECT Manual De Instrucciones página 6

The volume and volume changes are applied to both de-
vices. The pairing information is stored. This will automati-
cally reconnect the speakers the next time they start up.
The left / right assignment is saved as well.
By pressing the pairing button again for 3 seconds, the
pairing can be temporarily deactivated.
It is also possible to completely erase the pairing informa-
tion by pressing the Play / Bluetooth and the
3 seconds. This will also erase the stored playback devices.
Please note that a stereo link can only be established
between two similar D MATE versions. So two D MATE
DIRECT can be connected, one D MATE and a D MATE DI-
10 10
RECT can not be connected. This is due to the different
sound dispersion characteristics.
POWERBANK
The D MATE DIRECT includes a power bank feature that all-
ows you to charge smartphones and other source devices.
Simply connect the device to be charged to the USB out-
put. For this, the supplied USB cable or a standard char-
button for
ging cable for your device can be used. The USB output
has an output voltage of 5V at a current of 1A.
Even when switched off, the power bank on the DOCKIN
D MATE DIRECT can be used. To activate, briefly press
the
SPEAKERPHONE FUNCTION
The DOCKIN D MATE DIRECT can be used to receive calls
from your connected smartphone. Just press the
ton shortly to accept a call or hang up, if you have an active
call. A long press will reject an incoming call.
button.
11
but-