Responsibilities Of Employer, Tool Owner And Tool Operator - Hitachi NR 65K2 Instrucciones Y Manual De Seguridad

English
(17) Before each fi ring, be sure to position and insert
the fi rst nail point through the metal hole.
This tool and nails are designed for metal connector
with pre-punched holes.
Drive nails into work surface only; never into materials
too hard to penetrate.
If the nail is not positioned and insert properly, it could
ricochet and hurt yourself or someone.
If you are not sure to position and insert the nail
through the metal hole, never drive nails.
Never drive nails into metal. Only drive into pre-
punched metal holes.

RESPONSIBILITIES OF EMPLOYER, TOOL OWNER AND TOOL OPERATOR

1. Ensure that this MANUAL is available to operators
and personnel performing maintenance.
2. Train the operator in the safe use of the Nailer as
described in this MANUAL.
3. Ensure that only persons who have read and
understand this MANUAL operate the Nailer.
4. Ensure that Nailers are used only when operators and
others in work area are wearing EYE PROTECTION,
and other appropriate personal protective equipment
such as HEAD, HEARING, FOOT PROTECTION.
KEEP IT AVAILABLE FOR OTHERS!
8
SAFETY
WARNING
SAVE THIS MANUAL AND
— Continued
(18) Always point fi rst nail protruded from nose away
from yourself and others.
Keep your face, hands, feet and other body parts,
as well as those of other persons away from the
nose muzzle to avoid possible injury during use and
carrying.
5. Enforce the use of EYE PROTECTION by operators
and others in work area.
6. Ensure that Nailers are kept in safe working order as
described in this MANUAL.
7. Maintain Nailers properly.
8. Ensure that only qualifi ed personnel shall repair
Nailers.
9. Ensure that Nailers that require repair are removed
from service and that tags and physical segregation
are used as a means of control.