Installation Instructions For Intel ® Pentium ® 4 Mpga478 Clips - Gigabyte 3D Rocket Cooler GH-PCU22-SE Guia De Instalacion

Installation Instructions for Intel
Figure 1
Figure 2
Figure 3
Figure 4
Pentium 4 mPGA478 Clips
® ®
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Hook the clip on one end of the cooler with the insert space at
the CPU base (as seeing left Figure 3).Firmly push downwards
to clip the cooler end in place. Do the same for the other clip of
the cooler to secure cooler in place.
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. .Clips Installation is now complete.
If fan speed control is required, please refer to
"Installation of the Fan Speed Control Cable".
- 11 -
GH-PCU22-SE