Installation Instructions For Amd K8 Clip - Gigabyte 3D Rocket Cooler GH-PCU22-SE Guia De Instalacion

Installation Instructions for AMD K8 Clip

Figure 1
Figure 2
Figure 3
Figure 4
GH-PCU22-SE
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Align the three insert spaces of the clip with the three juts on the
CPU socket and then push firmly downwards to hold the clip in
space.
Figure 4
Push the lever on the side of the cooler towards the lever
position on the base of the CPU to secure the cooler atop
the CPU. Connect the 3-pin connector to the CPU fan
connector on the motherboard. Clip Installation is now
complete.
If fan speed control is required, please refer to
"Installation of the Fan Speed Control Cable".
- 12 -