Gigabyte 3D Rocket Cooler GH-PCU22-SE Guia De Instalacion página 14

Installation of the Fan Speed Control Cable
Figure 1
Figure 2
Figure 3
GH-PCU22-SE
Figure 1
Connect the 3-pin cooler power connector to the white
connector of the fan speed control cable.
Figure 2
The figure on the left shows the completed connection.
Figure 3
Connect the other side of the cable to the CPU Fan connector
located on the motherboard. The original fan speed of 3,000
rpm will then drop down to 2,500 rpm.
- 14 -