Before First Use; Assembly; Attaching To Lactaline Personal Breast Pump; Single And Dual Pumping - Ameda Lactaline Personal Instrucciones De Uso

Before First Use

• Boil all parts—except tubing, adapter cap,
and tubing adapter—for 20 minutes.
• Remove all parts from water right after boiling.
• Allow to air dry before assembly and use.

Assembly

2
1
3
4
5

Attaching to Lactaline Personal Breast Pump

Single and Dual Pumping

The pumpset can be used to single or dual pump.
To single pump:
Remove one tube and close tubing adapter.
To dual pump:
Both tubes should be attached to tubing adapter.
Insert the tubing adapter into the tubing adapter port of the pump.
6
E N G L I S H

Pump Controls

Do not boil or wash

To Begin Pumping

tubing, adapter cap,
• Center nipple(s) in breast flange(s).
and tubing adapter.
• Fill breast flange(s) with the breast(s) to create an air seal.

Starting Pump

• Choose power option, and connect pump to power source.
• Turn SUCTION dial to the right until light turns on. Pump is now on.

Setting Suction

• Begin pumping at the highest comfortable SUCTION setting for you.
• Increase suction by turning SUCTION dial to the right (clockwise) until reaching maximum
• If discomfort is felt in nipples(s) or breast(s), decrease suction. If discomfort is felt at all

Setting Speed

Dual pumping with
• Start with SPEED dial turned clockwise to the fastest setting.
one hand gives you
• Once milk is flowing (let-down), turn SPEED dial counter-clockwise to a slower setting to
a free hand for other
things.
• When milk flow slows turn SPEED dial clockwise to help trigger another let-down.
• At next let-down, turn SPEED dial counter-clockwise to a slower setting.
• Repeat steps as milk flow changes to pump more milk.

Turning Pump Off

• When finished pumping, turn SUCTION dial all the way counter-clockwise to turn pump off.
• After pump is off, if necessary, insert a finger between breast(s) and breast flange(s) to
• Remove breast flanges(s) from breast(s).
Turn dials to the right (clockwise) to increase pump settings (faster
SPEED, stronger SUCTION). Turn dials to the left (counter-clockwise)
to decrease pump settings (slower SPEED, gentler SUCTION).
Speed Suction
l
comfort level.
suction settings, turn pump off, insert a finger between breast(s) and breast flange(s) to
break suction and remove breast flange(s) from breast(s). Discontinue pumping and contact
a healthcare provider.
drain the breasts faster.
break suction.
7
E N G L I S H