Device Description; Preparing For Use; Bluetooth Connection; Control Panel Operation - physa PHY - CMS - 8 WHITE Manual De Instrucciones

6
TECHNICAL DATA
Parameter
Parameter value
description
LED USB VANITY MIRROR
Product name
WITH LOUDSPEAKER
PHY- PHY- PHY- PHY-
Model CMS-8 CMS-9 CMS-11 CMS-13
WHITE WHITE WHITE SILVER
Dimensions 680x805 680x505 780x505 680x805
[cm] x160 x160 x160 x160
Weight [kg] 17 11 12 17
Rated
voltage [V~]/
230/50
Frequency
[Hz]
Rated power
36
[W]
Number of
14 10 12 14
bulbs
Power of
a single light
3,12
bulb
[W], [V]
Bulb socket E27
Light colour
6400
[K]
Lifetime [h] 10000
Angle of
120
radiation [°]
USB port [V] 8
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual product.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms „device" or „product" are used in the warnings
and instructions to refer to LED USB VANITY MIRROR WITH
LOUDSPEAKER. Do not use in very humid environments or
in the direct vicinity of water tanks. Prevent the device from
getting wet. Risk of electric shock!
a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
g) ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
h) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
i) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
j) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
k) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
l) Keep packaging elements and small assembly parts
in a place not available to children.
m) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
n) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
o) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
p) Clean the device regularly to prevent stubborn grime
from accumulating.
q) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
r) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
s) Keep the device away from sources of fire and heat.
t) Do not hang curtains and / or clothes or other
materials on the mirror.
u) Do not place near light bulbs any objects that may
ignite and / or melt.
v) Some parts of this appliance can get very hot.
To avoid injury, be careful when touching these
surfaces.
w) When connecting additional equipment to the
USB port or power socket, observe the parameters
provided in the technical data table.
3. USE GUIDELINES
The cosmetic mirror is equipped with LED lamps
illuminating the workspace and speakers. You can connect
to the device via Bluetooth. The mirror functions are
controlled from a touch panel. The product is intended for
home use only!
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

1
2
3
4
6
5
1. LED bulbs
2. Mirror
3. USB port
4. Power socket
5. Control panel
6. Base

3.2. Preparing for use

ASSEMBLING THE APPLIANCE
Carefully unpack the mirror and unfold the set.
I. Standing mirror:
• Using a screwdriver and screws attach the base to
the mirror frame.
• Position the mirror in the desired location and screw
in the bulbs.
II. Hanging mirror:
• Measure and drill holes in the wall. Install the
anchors in the wall.
• Carefully hang the frame with the mirror on the
mounting pins and then screw in the bulbs
3.3. DEVICE USE

3.3.1. BLUETOOTH CONNECTION

To connect the mirror to a mobile phone using Bluetooth,
you only need to pair the devices. Device name: MUSIC
MIRROR.

3.3.2. CONTROL PANEL OPERATION

The control panel is located at the bottom of the mirror pane.
» Short press - previous melody
» Long press - volume down
» Short press - next melody
» Long press - volume up
» Short press - Bluetooth on
» Short press (when Bluetooth is on)
- melody start / pause
» Short press (when Bluetooth is on)
- answer/end call
» Press and hold - Bluetooth off
Light on / off, the dimming function

3.4. CLEANING AND MAINTENANCE

a) Always unplug the device before cleaning it.
b) After cleaning the device, all parts should be dried
completely before using it again.
c) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d) Do not spray the device with a water jet or submerge
it in water.
e) Use a soft, damp cloth for cleaning.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
7