Controller Leds; Disk Drive Leds - Vess R2000 Serie Guia De Inicio Rapido

CONTROLLER LEDS

When boot-up is finished and the Vess R2600 subsystem is functioning normally, the Controller
status LED displays green continuously; the Management port LEDs display green or flash
depending on your network connection; the FC, iSCSI, and SAS Expansion LEDs display green or
flash during port activity.
LED
SAS Expansion
Controller Status
Dirty Cache
USB
iSCSI (2 above
each port)
FC ports
Figure 28: Vess R2600fi controller LEDs
SAS
Controller
Expansion
Status
LED

DISK DRIVE LEDS

There are two LEDs on each Drive Carrier. They report the presence of a disk drive, activity of the
drive, and the drive's current condition.
Figure 29: Vess R2600 drive carrier LEDs
If there is a disk drive in the carrier, the Power/Activity LED displays Blue. If not, the Power/Activity
LED remains dark. The Power/Activity LED flashes Blue during drive activity.
The Disk Status LED displays Green when a drive is configured.
Description (refer to product manual for more details)
Lights green when connected, flashes green when active.
Green light indicates controller is operational.
Lights amber if cache is dirty, otherwise dark.
Green light indicates a connection, dark when not connected.
Left LED lights green when connected, flashes green when active, dark if
not connected. Right LED indicates connection speed, green is 100 Mbps,
amber is 1000 Mbps.
See product manual.
USB
Dirty
Cache LED
iSCSI port LEDs
Drive Status
Power/Activity
28
FC Port LEDs