Reinigung Und Wartung - Singercon CON.LMH-1/30/WHB Manual De Instrucciones

DE
7 Stroboskop 0-255
8 Verdunkeln 0-255
Bewegungsge-
9 schwindigkeit Pan/ 0-255
Tilt
Automatikmodus
Funktion eines
0-59
anderen Kanals
10
Automatikmodus 60-159
Tonmodus 160-255
Pan Running 10-100
Tilt Running 101-200
11
Pan Tilt Running 201-249
Reset 250-255
9-Kanal-Modus
1 Pan running 0-255
2 Tilt Running 0-255
Farbe
Farbauswahl 10-139
3
140-255
Automatischer
(Geschwindigkeit von
Farbwechsel
langsam bis schnell)
Gobo
Stationäres Gobo 8-63
Bewegliches Muster 72-127
4
128-255
Automatischer
(Geschwindigkeit von
Farbwechsel
langsam bis schnell)
5 Stroboskop 0-255
6 Verdunkeln 0-255
Bewegungsge-
7 schwindigkeit Pan/ 0-255
Tilt
Automatikmodus 60-159
8
Tonmodus 160-255
Pan Running 10-100
Tilt Running 101-200
9
Pan Tilt Running 201-249
Reset 250-255

3.4. REINIGUNG UND WARTUNG

a) Bevor Sie anfangen zu reinigen, trennen Sie das Gerät
von der Stromversorgung.
b) Verwenden Sie zur Reinigung der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
6
c) Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
d) Es ist verboten, das Gerät mit einem Wasserstrahl zu
besprühen oder in Wasser zu tauchen.
e) Es darf kein Wasser über die Belüftungsöffnungen am
Gehäuse ins Innere des Geräts gelangen.
f) Die Belüftungsöffnungen sind mit Pinsel und Druckluft
zu reinigen.
g) In Hinblick auf technische Effizienz und zur
Vorbeugung vor Schäden sollte das Gerät regelmäßig
überprüft werden.
h) Benutzen Sie einen weichen Lappen zur Reinigung.
i) Reinigen Sie das Gerät nicht mit säurehaltigen
Substanzen. Medizinische Geräte, Verdünner,
Kraftstoff, Öle oder andere Chemikalien können das
Gerät beschädigen.
ENTSORGUNG GEBRAUCHTER GERÄTE
Dieses Produkt darf nicht über den normalen Hausmüll
entsorgt werden. Geben Sie das Gerät bei entsprechenden
Sammel- und Recyclinghöfen für Elektro-
Elektronikgeräte ab. Überprüfen Sie das Symbol auf dem
Produkt, der Bedienungsanleitung und der Verpackung.
Die bei der Konstruktion des Gerätes verwendeten
Kunststoffe können entsprechend ihrer Kennzeichnung
recycelt werden. Mit der Entscheidung für das Recycling
leisten Sie einen wesentlichen Beitrag zum Schutz unserer
Umwelt. Wenden Sie sich an die örtlichen Behörden,
um Informationen über Ihre lokale Recyclinganlagen zu
erhalten.
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Product name
Model
Rated voltage [V~]/
Frequency [Hz]
Rated power [W]
Protection rating IP
Dimensions [mm]
Weight [kg]
Temperature [°C]
Minimal distance from
flammable objects [m]
Source of light
und
Colour
Beam angle [°]
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
ATTENTION! Electric shock warning!
ATTENTION! HOT SURFACE, RISK OF BURNS!
Only use indoors.
Replace any cracked protective screen.
Do not look directly into the light beam.
Parameter value
Do not mount on flammable surfaces.
Gobo Spot Moving Head
Keep a minimum distance of 0.5 m between
CON.LMH-1/30/WHB
all external surfaces of the device and any
inflammable materials.
230/50
PLEASE NOTE! Drawings in this manual are for
60
illustration purposes only and in some details may
differ from the actual product.
IP20
The original operation manual is in German. Other
170x145x240
language versions are translations from German.
2,6
2. USAGE SAFETY
tc=60 / ta. 45 ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
0,5
or serious injury or even death.
The terms „device" or „product" are used in the warnings and
1 LED (white light) x30W
instructions to refer to Gobo Spot Moving Head.
7 + white light
2.1. ELECTRICAL SAFETY
Tilt: 540
a) The plug must fit the socket. Do not modify the plug
Pan: 270
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an increased
risk of electric shock if the earthed device is exposed
to rain, comes into direct contact with a wet surface
or is operating in a damp environment. Water getting
into the device increases the risk of damage to the
device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If using the device in a damp environment cannot be
avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
f) Do not use the device if the power cord is damaged
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
g) To avoid electric shock, do not immerse the cord, plug
or device in water or other liquids. Do not use the
device on wet surfaces.
h) ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
i) Prevent the device from getting wet. Risk of electric
shock!
2.2. SAFETY IN THE WORKPLACE
a) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
b) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make repairs
yourself!
c) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
d) Use the device in a well-ventilated space.
EN
7