habitat et jardin 1332_103129 Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
STEP 1:
1.
Remove the paper tube, carriage bolt (30), arc washer (31) and cap nut (32) from the front bottom
tube (33).
2.
Tighten the front bottom tube (33) to the mainframe (1) with carriage bolt (30), arc washer (31), and cap
nut (32).
STEP 2:
• Remove the cushion (24), screw (45) and fixed plate (44), then install the slide saddle (18) onto
the slide rail (22), and tighten the cushion (24) to the slide rail (22).
• Tighten the fixed plate (44) to the slide rail (22) with screw (45).