habitat et jardin 1332_103129 Manual De Instrucciones página 8

STEP 3:
Tighten the rear support (29) to the slide rail (22) with hexagon bolt(25),flat washer(8) and nylon nut (9),
then tighten the protective guard (28) to the rear support (29) with the knob (2) and screw (27).
STEP 4:
1.
Connect the connection wire (46) to the sensor wire (36), then tighten the slide rail
(22) to the mainframe (1) with hexagon bolt (14), knob (2), knob (15), flat washer (35), flat
washer (8) and nylon nut (9), cover the cap (70) at last.
2.
Tighten the pedal (11) to the mainframe (1) with bolt (12), flat washer (10). When folding it,
take off the knob (15) and fold the slide rail (22), then fix it with the knob (15).