KAL II
GB
original spare parts to ensure that
your device operates reliably. The
light source contained in this lumi-
naire shall only be replaced by the
manufacturer or his service agent or
a similar qualified person.
– Always use original Festool parts
for repair and maintenance.The use
of incompatible accessories or spare
parts can result in electric shocks or
other injuries.
– When charging the working light, do
not use charging adapters from oth-
er manufacturers. Otherwise, there
is a danger of fire and explosion.
– This device can be used by persons
with reduced physical, sensory or
mental abilities or those who lack ex-
perience or knowledge, if they are
supervised or have been instructed
on safe use of the device and under-
stand the resulting dangers. Chil-
dren should always be supervised to
ensure that they do not play with the
machine.
4
Technical data
Compact working light
Rated voltage / capacity of integral battery (LiIon)
Rated voltage with external Festool battery pack
Charging socket voltage range
Lighting device
Light duration (internal bat-
tery)
Luminous flux, brightness
12
– Ensure stable footing or secure
mounting when securing to a tripod
or with a magnetic foot. In the event
of unstable footing or insecure
mounting, the working light may fall
and cause personal injuries or mate-
rial damage.
– Protect the battery pack from exces-
sive heat or constant heat sources
such as sunlight or naked flames.
There is a risk of explosion.
– Never use water to extinguish burn-
ing li-ion battery packs, always use
sand or a fire blanket.
3
Intended use
The compact working light was specifi-
cally designed for illuminating dry areas
in interior spaces.
The device is not suitable for illuminating
rooms in residential buildings.
Min. light: Stage 1 (30%)
Max. light: Stage 2 (100%)
Min. light: Stage 1 (30%)
The user is liable for improper
or non-intended use.
7,2 V = / 2,9 Ah
-
+
12x 1.5W Power LED
KAL II
10,8 - 19V =
7,2 - 19 V =
4 h 50 min.
2 h
310 Lumen