BaByliss PRO FLASHFX FX59ZE Manual Del Usuario página 7

ENGLISH
PROFESSIONAL
CORDLESS TRIMMER
FX59ZE
This heavy-duty trimmer features
zero gap stainless steel T-blades,
great for detailing, designs and
all other fine work. Very easy-to-
handle, it is also perfect for fading
beards, sideburns and the nec-
kline. A powerful DC motor and
lithium polymer batteries deliver
high performance for clean, close
cutting.
OPERATING INSTRUCTIONS
• Before using the trimmer for
the first time, charge conti-
nuously for 2 hours. Maximum
battery capacity will only be
reached after 3 charging and
discharging cycles.
• Make sure the switch on the trim-
mer is in the "0-OFF" position.
Connect the charging jack into
the receptacle on the buttom
of the trimmer. Plug the adapter
into any electrical outlet (at the
voltage listed on the label affixed
to the adapter). The charging
indicator will light up to indicate
that the charging has begun.
Charging is complete after 1 hour.
User will see all 4 bars lit on the
trimmer handle when finished.
• The adapter may become warm
while charging. This is normal.
• Preserving the batteries: in order
to maintain the optimum capa-
city of the rechargeable batteries,
the trimmer should be recharged
for 2 hours approximately every 6
months.
• Turn the switch to "HI" for high-
speed function and "LO" for low-
speed function.
• Make sure the switch on the trim-
mer is in the "0-OFF" position
when the trimmer is not opera-
ting.
MAINTENANCE INSTRUCTIONS
VERY IMPORTANT: Blades must
be cleaned and oiled on a regular
basis for proper functioning. Fai-
lure to regularly clean and oil the
blades will void the warranty.
Maintenance of the blades
• Remove hair trimmings and
debris from the blades using the
provided cleaning brush. Wipe
the housing clean with a dry cloth.
• Apply a few drops of lubricating
oil to the blades, and wipe off any
excess oil with a dry cloth. This
last procedure is important for
the proper maintenance of the
blades.
Always apply oil to the blades be-
fore and after use. This will ensure
maximum cutting performance.
Hold trimmer away from you in a
downward position and apply oil
on the front and sides of the cutter
7