BaByliss PRO FLASHFX FX59ZE Manual Del Usuario página 9

Regular
Zero Gap
ZERO GAP
Step 1.
Before placing the blade into the
adjustment tool, use the screwdri-
ver provided to loosen the tension
screws, without removing them
completely from the blade holder.
REGULAR
ZERO GAP
Step 2.
Place the blade into the adjust-
ment tool in the side labelled 'Zero
Gap'.
Step 3.
Push the blade guide up as far as
the adjustment tool allows, so the
moving blade sits closely with the
top of the adjustment tool. The
blades will now be flush with each
other.
Step 4.
Using the screwdriver, tighten the
tension screws to hold the blade
in place.
9