Rear View; Display; Starting Up; Bank Note Validator Nc 330 - Olympia NC 330 Manual De Instrucciones

5.1.2

Rear view

1 Rear discharge slot
2 Serial port (to connect a PC)
3 Connection for power adapter
plug
5.1.3

Display

1 Indicates the currency to be
validated
2 Indicates the number of bank
notes checked (count display)
3 Indicates the total value of bank
notes validated (value display)
4 Status line with error indicators
and status indicators (also refer to
Chapter 6 )
X
5.2

Starting up

Set the bank note validator down on a
stable, level surface.
Note: Position the NC 330 near
a power socket.
Note: If the bank note validator has been exposed to cold temperatures for a longer period, wait for at
least 2 hours until the bank note validator has reached room temperature before switching it on.
5.2.1

Bank note validator NC 330

The power supply to the bank note validator is only provided via the power adapter plug.
1. Ensure that the bank note validator is switched off at the On/Off switch.
2. Connect the power adapter plug to the NC 330 on the rear side of the bank note validator.
3. Then connect the power adapter plug to an appropriate power socket (AC 110V~240V, 50Hz/60Hz).
5.2.2

Bank note validator NC 340

The power supply to the bank note validator can be provided via the power adapter plug or an integrated
rechargeable battery. If the NC 340 bank note validator is powered via the power adapter plug, the battery is
charged at the same time. The status of the battery is indicated in the status line by mean of the corresponding
icon.
When the battery is fully charged, the bank note validator can be operated for maximally 90 minutes without the
power adapter plug.
Note: If the bank note validator is operated without the power adapter plug and remains unused for 5
minutes, it switches off automatically.
3
- 13 -
Olympia NC 330 / NC 340
2
1