Technical Data; Protecting The Environment; Machinery Directive - Black+Decker CS1825ST1 Manual De Instrucciones

ENGLISH
Saw chain and guide bar
After every few hours of use and before storage, remove
u
the guide bar (7) and the saw chain (6) and clean them
thoroughly.
Make sure that the guard is clean and free from debris.
u
Oil sprocket nose and chain bar via the sprocket
u
lubrication holes (21) (fig. E). This ensures an even
distribution of wear around the guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the
tool it is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package.
Replacing worn out saw chains
Replacement saw chains are available through retailers or
Black & Decker service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
What to do if your chainsaw needs repair. Your chainsaw
is manufactured in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this may
result in considerable danger to the user. We recommend you
keep this user manual in a safe place.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
Batteries
At the end of their useful life, discard batteries with
due care for our environment:
Do not short-circuit the battery terminals.
u
Do not dispose of the battery(s) in a fire as this may result
u
in a risk of personal injury or an explosion.
14
(Original instructions)
Run the battery down completely, then remove it from the
u
tool.
Batteries are recyclable. Place the battery(s) in a suitable
u
packaging to ensure that the terminals cannot be short-
circuited. Take them to any authorised repair agent or a
local recycling station.

Technical data

CS1825ST1
Voltage V
DC
Bar length
mm
Max bar length
mm
Chain speed
m/sm
(No-load)
Max cutting length
mm
Oil capacity
ml
Weight kg
Battery BL2018ST
Voltage V
DC
Capacity
Ah
Type
Li-Ion
Charger 906349**
Input Voltage V 200-240
DC
Output Voltage Ah 8-20
Output Current mA 1000
Approx. charge
h
time
Guaranteed sound pressure level measured according to EN60745:
LpA (sound pressure) 70.5 dB(A), uncertainty (K) 1.5 dB(A)
LwA (sound power) 90.5 dB(A), uncertainty (K) 1.5 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h
EC declaration of conformity

MACHINERY DIRECTIVE

OUTDOOR NOISE DIRECTIVE
CS1825ST1, GKC1825L20, GKC1825LST – Chainsaw
GKC1825L20 GKC1825LST
H1 H1 H1
18 18
250 250 250
250 250 250
3.5 3.5 3.5
250 250 250
55 55
3.1 3.1 3.1
BL2018 BL2018ST
18 18
2 2
Li-Ion Li-Ion
905902** 905902**
(Type 1) (Type 1)
100 - 240 100 - 240
8 - 20 8 - 20
400 400
2 5
)= 4.49 m/s², uncertainty (K) = 1.5 m/s²
18
55
18
2
5