Product Features; Technical Data; Declaration Of Conformity; Noise/Vibration Information - BTI PROFILINE BM 550 E Manual Original

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Key type drill chuck
2 Rotational direction switch
3 On/Off switch
4 Lock-on button for On/Off switch
5 Auxiliary handle (insulated gripping surface)
6 Chuck key
7 Handle (insulated gripping surface)
8 Screwdriver bit*
9 Universal bit holder*
10 Securing screw for key type drill chuck
11 Allen key*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Rotary drill
Art. No.
Rated power input
Output power
No-load speed
Rotational speed under
load, max.
Rated torque
Spindle collar dia.
Max. drilling dia.
– Steel
– Wood
– Aluminium
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given apply for nominal voltages [U] of 230/240 V.

Noise/Vibration Information

Measured sound values determined according to
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 84 dB(A); Sound power
level 95 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
24 | English
BM 550 E
9015856
W 550
W 285
-1
min 0 – 550
-1
min 450
Nm 5
mm 43
mm 13
mm 40
mm 20
mm 1.5 – 13
kg 2.1
/ II
Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal: Vibration emission value
2
a =3.5 m/s , Uncertainty K=1.5 m/s
h
Screwdriving: Vibration emission value
2
a <2.5 m/s , Uncertainty K=1.5 m/s
h
Tapping: Vibration emission value a
Uncertainty K=1.5 m/s
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives 2004/108/EC, 2006/42/EC.
Technical file at:
BTI Befestigungstechnik GmbH & Co. KG
D-74653 Ingelfingen
Jürgen Dietz
General Manager
01.12.2009, BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
2
,
2
,
<2.5 m/s
h
2
.
i. V. Günter Hub
Purchasing Manager
2 609 932 736 • 13.1.10
2
,