Metra 99-7880B Manual De Instrucciones página 6

Double DIN head unit provisions
1. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapter from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
2 Mount the factory radio brackets to the
new head unit with the screws supplied
with the unit. (Figure A)
3. Mount the radio assembly into the dash
and snap the radio housing panel over
the radio asembly. (Figure B)
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7880B
6
(Figure A)
(Figure B)