Manual Flash Exposure Correction In; The Auto Flash Mode; Auto Flash Mode A With Digital; Cameras - Metz SCA 3302 M7 Manual De Instrucciones

4.14.1 Manual flash exposure correction
in the auto flash mode A
The mecablitz 44 MZ-2, 54 MZ-... , 70 MZ-... and
76 MZ-5 digi permit a flash exposure correction
value to be set in the auto flash mode A (refer to the
operating instructions of the mecablitz for the set-
ting procedure).

4.14.2 Auto flash mode A with digital

cameras

If a digital camera Dimage ... is used with a meca-
blitz that works in the auto flash mode A, a measu-
ring preflash will not be fired before shooting the
picture. Consequently, the camera will not conduct
an automatic white balance with the result that the
shots may be colour cast.

4.15 Manual flash mode M

In the manual flash mode M the light is not con-
trolled by a sensor. Instead the mecablitz operates
at full light output. Partial light output levels can be
used with some mecablitz models (see operating
instructions for the given mecablitz). For manual
flash mode, the mecablitz is set to "M" (the meca-
blitz 32 Z-2 and 32 MZ-3 have an additional "W"
setting for a partial light output).
The camera is set to mode A (aperture priority
mode) or M (manual camera mode).
Various cameras only permit the TTL flash
mode. See operating instructions for the indivi-
dual camera.
28