Dryer Cycle Guide
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on it
(including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death or
fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance's Owner's Manual, before operating this appliance.
Sensor Cycles
Use Sensor Cycles for better fabric care and energy savings. The dryer senses moisture in the load or air temperature and shuts off
when the load reaches the selected dryness level.
If settings are changed, the new settings will be remembered. If there is a power failure, settings will return to the default. Not all features
and cycles are available on all models. Not all settings and options are available on each cycle.
NOTE:Temperatures shown in bold are the default settings for that cycle. Note that you cannot adjust the time with these cycles.
Items to Dry:
Heavyweight items such
as jeans, towels or
heavy work clothes.
Work clothes, casual
wear, mixed cottons,
sheets, corduroys.
Shirts, blouses,
permanent press,
synthetics, lightweight
items.
Undergarments,
blouses, lingerie,
performance wear.
Work clothes, casual
wear, mixed cottons,
sheets, corduroys.
Cycle:
Temperature:
HEAVY DUTY
High
Medium
Low
Extra Low
NORMAL
High
Medium
Low
Extra Low
WRINKLE
High
CONTROL
Medium
Low
Extra Low
DELICATES
High
Medium
Low
Extra Low
NORMAL
High
MORE DRY
Medium
Low
Extra Low
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
Available
Description:
Options:
Wrinkle Shield™
Uses Medium heat as default and longer
cycle time to dry large loads of heavy
Mute Cycle
weight, hard to dry items.
Signal
Static Reduce
Wrinkle Shield™
Uses Medium heat as default to dry large
loads of mixed fabrics and items.
Mute Cycle
Signal
Static Reduce
Wrinkle Shield™
Uses a Low heat as default for improved
moisture removal and enhanced fabric
Mute Cycle
care.
Signal
Static Reduce
Wrinkle Shield™
Uses Extra Low heat as default to gently
dry delicate objects.
Mute Cycle
Signal
Wrinkle Shield™
Uses Medium heat as default to dry large
loads of Mixed Fabrics and items, with
Mute Cycle
slightly higher temperatures than Normal
Signal
Cycle and tuned to achieve "More Dry"
Static Reduce
results.
1