Jackets, comforters,
pillows.
Work clothes, casual
wear, mixed cottons,
sheets, corduroys.
Large loads of jeans,
towels and heavyweight
items.
On steam models, you may select the "Static Reduce" setting. The dryer will automatically tumble, pause, and introduce a small amount
of moisture into the load to help reduce static. This option adds approximately 3 minutes to the total cycle time.
Steam Refresh Cycle (on some models)
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to Refresh:
Shirts, blouses and
slacks
Timed Cycles
In these cycles, you can specify the drying time. Time options available are 15, 30, 60 and 90 minutes. If settings are changed, the new
settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to the default. Not all features and cycles
are available on all models. Not all settings and options are available on each cycle.
Items to Dry:
Any Load.
Small loads and
sportswear.
Foam, rubber, plastic or
heat sensitive fabrics.
BULKY ITEMS
High
Medium
Low
Extra Low
LESS DRY
High
Medium
Low
Extra Low
TOWELS
High
Medium
Low
Extra Low
Cycle:
Temperature:
STEAM REFRESH High
Medium
Cycle:
Temperature:
TIMED DRY
High
Medium
Low
Extra Low
QUICK DRY
High
Medium
Low
Extra Low
AIR ONLY
N/A
Wrinkle Shield™
Use for drying large, bulky items; do not
overfill dryer drum. Partway through the
Mute Cycle
cycle, the signal will sound to indicate
Signal
when it is time to rearrange items for
optimal drying.
Wrinkle Shield™
Uses Medium heat as default to dry loads
of Mixed Fabrics and items, with slightly
Mute Cycle
lower temperatures than Normal Cycle and
Signal
tuned to achieve "Less Dry" results.
Static Reduce
This is a long cycle with High heat as
Wrinkle Shield™
default. This cycle is not recommended for
Mute Cycle
all fabrics. Use for large loads of
Signal
heavyweight fabrics.
Static Reduce
Available
Description:
Options:
Wrinkle Shield™
Use to smooth out wrinkles and reduce
odors from loads left in the dryer too long.
Mute Cycle
Do not add dryer sheets.
Signal
Available
Description:
Options:
Wrinkle Shield™
Use to dry items to a damp level for items
that do not require an entire drying cycle.
Mute Cycle
Select a drying temperature based on the
Signal
type of fabrics in your load. If you are
unsure of the temperature to select for a
load, select the lower setting rather than
the higher setting.
Wrinkle Shield™
For small loads of 3-4 items.
Mute Cycle
Signal
Wrinkle Shield™
Uses unheated air to dry heat-sensitive
items
Mute Cycle
Signal
2