Using The Appliance - TEFAL Powermix 500 W HT6111 Manual De Instrucciones

using the AppliAnCe

important:
neVer use the BeAters or KneADers
At the sAMe tiMe As the BlenDer
shAft, Mini-Chopper or BlenDer
BoWl.
Do not use the mini chopper or the
blender bowl accessories without the
stabilising base.
Mixer funCtion With
BeAters or KneADers:
• Manual use (without the base):
• Check that the appliance is
unplugged, that the speed control
(a2) is set to "0" and that there
is neither blender shaft, nor mini-
chopper nor blender connected to
the back of the appliance.
• Insert the rods of each beater (b) or
kneader (d) into the corresponding
holes and lock into place. the
beaters and kneaders have a
specific shape. the kneader or
beater equipped with the metal
collar (f) should be positioned to
the left into the biggest hole (fig.
1).
• Connect the appliance:
- Your appliance has 5 speed levels
and a turbo button. Always begin
mixing or kneading at speed 1
initially, then move to speed 2, 3, 4
or 5 (fig. 2).
- To knead thick dough, we
recommend using speed 5 only.
- You can also increase the speed
by pressing the turbo button. We
however recommend that you use
it only briefly (a maximum of 30
seconds for thick dough).
• After finishing, set the speed control
(a2) to "0".
• Disconnect.
• Then press the ejection button (a1) to
remove the beaters or kneaders.
• using with the base (g):
(depending on model)
• Check that the appliance is
unplugged, that the speed control
(a2) is set to "0" and that there is no
blender shaft.
• Insert the rods of each beater (c) or
kneader (e) into the corresponding
holes and lock into place. the
beaters and kneaders have a
specific shape. the kneader or
beater with the metal collar (f)
should be positioned to the left, in
the biggest hole (fig. 1).
• Place the base (g) on the worktop:
- To raise the arm, unlock by pressing
the button (i) (fig. 3).
- Position the bowl (h) (fig. 3).
- Press the button (i) to unlock the
arm and lower it (fig. 4).
- Place the mixer fitted with the
kneaders or beaters on the hinged
arm until you hear it click into place
(fig. 5).
note:
insert the Mixer BY positioning
the BeAters or KneADers in the
notChes (fig. 5).
85