CleAning
• Make sure that the appliance is
unplugged.
• Clean the beaters (b/c), kneaders
(d/e), blender shaft (l/m), mini-
chopper (n) and blender bowl
(o) immediately after use to avoid
remains of mixtures with egg or oil
sticking or drying on them.
• You can wash the beaters (b/c),
kneaders (d/e), the plastic and metal
blender shaft (l/m), bowl, blade, mini
chopper stabilising base (n1/n2/q)
and the bowl, blade, sealing lid and
stabilising base of the blender (o1/
o2/o3/q) in water with a sponge and
some washing-up liquid.
- The beaters (b/c), kneaders (d/e),
bowl, blade and mini chopper
stabilising base (n1/n2/q) and
the bowl, blade, sealing lid and
stabilising base of the blender bowl
(o1/o2/o3/q) can be placed in
the dishwasher.
The blender shaft (l/m) can be
washed in the top basket of the
dishwasher with the blades
facing upwards.
• Blades are very sharp, ensure care is
taken when placing and removing
the blades from the dishwasher.
• Clean the base (g), the reducer of
the mini-chopper (n3), the reducer of
the blender (o4), the appliance body
(a) only with a damp sponge and dry
thoroughly.
• Never wash the motor unit in the
dishwasher.
• Do not use scouring pads or objects
containing metal parts.
• Never immerse the motor unit in
water. Wipe with a dry or slightly
damp cloth.
Attention: the blender shafts (l or
m), the blade of the mini-chopper
(n2) and the blade of the blender
(o2) are very sharp. Care should
be taken when cleaning them.
89