Publicidad
General
Tiger hand basin taps are designed for installation on hand basins with a tap opening of 30 - 37 mm (according to
NEN-EN 32). The taps are connected to the cold water supply using flexible pressure hoses suitable for connection
using 10 mm bulkhead couplings.
Items hand basin tap assembly instructions
Installation:
(see accompanying drawings)
Before you start: Flush the pipes thoroughly in order to make sure there that no dirt
can get into the tap from the pipes. The warranty does not cover damage to interior parts
as a result of dirt.
1.
Your Items hand basin tap features a 'Top fixing' system. This means that installation above the hand basin
requires no special tools. Check whether the assembly unit is put together properly by comparing it with the
drawing. The markings should always be facing outward during assembly.
2.
Push the bottom plate through the hole in the sink by bending the flexible help strips somewhat.
3.
Hold onto both help strips and slide the top plate together with the flexible sealing washer.
4.
Insert the three assembly bolts (included) and tighten these firmly and evenly.
5.
Check whether the assembly plate is mounted straight with the marking on the front. Snip or slice the help
strips off. Any parts of the gasket protruding from the upper assembly plate must be cut off.
6.
Push the flexible pressure hose through the opening of the assembly unit and put the tap on the sink.
7.
Attach the tap to the assembly unit by firmly tightening the assembly screw on the back.
8.
Connect the pressure hose to your water mains using bulkhead couplings. The diameter of the pressure hose
is 10 mm. The connection to the water mains varies from home to home. Suitable bulkhead couplings are
available on the market in a range of models en sizes.
9.
Operation: When the handle points forward, the water supply is closed off. Regulate the volume in a
continuously variable manner by moving the handle to the right.
Turn on the water pressure and check for leaks. Tiger disclaims any and all liability for damage caused by improper use.
Your tap is now ready to use.
Features:
Your Hand basin tap features:
•
'Top fixing' assembly system. The tap is installed from the top, without the need for any special tools
•
Ceramic discs
•
Solid brass housing and handle
•
PEX flexible pressure hose (a standard feature for use in drinking water units under the new international
standard)
•
Regulated aerator with anti-calcium function, independent of pressure
Maintenance:
Clean with a soft, damp cloth; do not use any abrasives.
The warranty does not cover damage caused by insufficient or improper maintenance, the use of aggressive abrasives,
scratches, negligence, normal wear and tear or changes to the structure made by non-qualified persons.
Anti-calcium aerator: Remove the calcium deposits by rubbing firmly with your fingertips across the outlet (aerator) of the
tap. Thanks to its special design and flexible material, this should be enough to restore the high-performance action of
the aerator.
Service and warranty:
Tiger guarantees that your hand basin tap will work perfectly. However, should there be any problem with your tap resul-
ting from any production and/or material error, Tiger will replace the defective part(s) free of charge within the 5 year
warranty period. If the tap cannot be repaired, you may claim a replacement product under the warranty. Your proof is
purchase is also your warranty, and should be submitted when making any warranty claims. The drawing on page 11
contains an overview of all of the parts and the corresponding article numbers.
-2-
5019.5.03.10
(chrome)
5019.5.09.10
(
stainless steel pvd)
5000.5.03.54
5000.5.55.05
5019.0.01.13
5000.5.55.96
(r)
5000.5.03.33
(chrome)
5000.5.03.53
5000.5.09.33
(stainless steel pvd)
5000.5.03.01
(3pcs)
5000.5.07.51
5000.5.01.10
(2pcs)
5000.5.80.51
5000.5.03.98
(1pcs)
-11-
1.
2.
3.
4.
-12-
5.
6.
7.
-13-
Publicidad
