Connecting The Camera; D - Using The Product - THOMSON 512359 Manual De Instrucciones

1080p varifocal dome camera
• Unscrew the position locking screw, point the video cameras in the desired direction and then re-lock it
using the locking screw.
• Once the camera is operational, adjust the zoom and then the focus. The zoom and focus are adjusted
by gently unscrewing the corresponding locking screw:
2 - CONNECTING THE VIDEO CAMERA
To connect the camera to your Thomson 512320, 512321, 512322 or 512323 video recorder, refer to the
manual for your video recorder.
Note: Your camera is POE compatible. If the recorder is also POE compatible, the use of the mains adaptor
supplied is optional.
Note: In this section, your camera should already be installed and connected. If this is not the case, please
refer to the previous chapters and to the instructions for your video recorder.
Features of the THOMSON outdoor varifocal 1080p camera
• Your additional camera provides an additional image source for your videosurveillance kit.
• It therefore provides additional and stronger protection and surveillance.
• The camera includes an infrared light, controlled by a twilight sensor, which emits
a ray of light that is invisible to the naked eye, providing an image on the screen regardless of the
brightness.
• The camera also features a manual zoom which allows you to adjust the field of vision and the area to
be monitored.
C - iNSTALLATiON

d - uSiNg ThE prOduCT

EN EN
5