6.
Do not press the START key when the cuff is not placed around the
wrist.
7.
Do not disassemble the main unit or cuff.
8.
If the unit is stored in a cold place, allow it to acclimate at room
temperature before use.
9.
Clean the blood pressure monitor body and the cuff carefully with a
slightly damp, soft cloth. Do not press. Do not bend the pre-formed
cuff inside out. Do not wash the cuff or use chemical cleaner on it.
Never use thinner, alcohol or petrol (gasoline) as cleaner.
3
Helpfull tips
Here are a few helpful tips to help you obtain more accurate readings:
•
Do not measure your blood pressure immediately after consuming a large
meal. To obtain more accurate readings, please wait one hour before
measuring.
•
Do not smoke or drink alcohol before measuring your blood pressure.
•
You should not be physically tired or exhausted while taking a
measurement.
•
It is important that you relax during measurement. Try to take 15-minutes
rest before a reading.
•
Do not take measurements if you are under stress or under tension.
•
Take your blood pressure at normal body temperature. If you are feeling
cold or hot, wait a while before taking a measurement.
•
If the monitor is stored at very low temperature (near freezing), have it
placed at a warm location for at least one hour before using it.
•
Wait about 5 minutes before taking the next pressure measurement.
All manuals and user guides at all-guides.com
TOPCOM BPM Wrist 3311
5