Technical Data; Installation - JBL CristalProfi i60 greenline Manual De Instrucciones

Technical Data

Max. pump capacity [l/h]
For aquariums [l]
L x B x H ( mm)*
Filter module [pc.]
Filter material [l]
Voltage [V]/Frequency [Hz]
Power input [W]
W
kWh per year
€ per year**
€ in guarantee period**
*including flow regulator
** at 0.20 € / kWh

Installation


Unpacking and preparation
Carefully remove the filter and the separate accessories from the packaging and check that nothing is missing. In the event
that anything is missing or damaged, please contact your specialist retailer.
Insert the enclosed large suction cups into the side openings of the pump head by turning and pressing lightly. Make sure
the central pin fits into the suction cup before locking in place. Pull the pump head off the filter module for model i60 and
separate the filter modules for models i80, i100 and i200 in the same manner. Remove the foam cartridges without the central
collection pipe from the modules. Rinse the cartridges under lukewarm tap water.
Push the foam cartridge(s) back onto the collecting pipe in the respective module.
18
CP i60
420
40-80
85x85x155
1
0.25
AC230, 50 AC230, 50
4
Energy savings compared to the previous model
7
61
12.2
48.8
CP i80 CP i100
420
60-100 90-160
85x85x225 85x85x295
2
0.5
AC230, 50
4
7
61
12.2
48.8
CP i200
720 720
130-200
85x85x365
3 4
0.75 1
AC230, 50
8 8
3 3
26.25 26.25
5.25 5.25
21 21