Sandberg 630-89 Manual Del Usuario página 2

1 Introduction
Make it easier to work with your laptop. The
Sandberg 2in1 Numeric Mouse is a numeric
keypad and an optical mouse combined in a
single, handy unit that's easy to carry around.
Simply connect it to a USB port and it will work
without the need to install drivers. The mouse
sits perfectly in your hand, and you can lock the
keys if you want to use only the mouse function,
and vice versa.
2 Installation
1. Start your computer in Windows
the USB plug to an unused USB port in your
computer.
®
2. Windows installs the necessary drivers
automatically.
Your Sandberg 2in1 Numeric Mouse is now
ready for use.
3 Using your Sandberg 2in1 Numeric
Mouse
3.1 Selecting the function
On the left of the mouse there is a button called
"Mode". Use this button to enable the desired
function. Your choice is indicated by the LEDs
next to the keypad or mouse icons:
Keypad and mouse LEDs both lit: Both keys and
mouse are enabled.
Only keypad LED lit: Only keys are enabled.
Only mouse LED lit: Only the mouse is enabled.
3.2 Keypad
When keys are enabled, you can use the keypad
just like any other keyboard. Use the "Num Lock"
key to lock the keypad so that it enters numbers.
If "Num Lock" is active, the LED marked "Num"
is lit. If you press "Num Lock" to switch off the
LED, the characters shown below the numbers
will be entered. For example, 8 becomes Up
arrow, etc.
NB: The "Excel" key is a shortcut that instantly
opens Microsoft
on your computer).
3.3 Mouse
®
and connect
When the mouse is enabled, you can use it just
like an ordinary mouse, with left and right buttons
separated by the scroll wheel in the middle.
2
®
Office Excel (if it is installed