Promise Technology SuperTrak EX8300 Guia De Incio Rapido página 11

Highlight Save Configuration and press Enter.
The Logical Drive Management screen appears with your new logical drive.
At this point you can create additional logical drives, if there is physical drive
space available.
13. Press the F10 key to exit the SuperBuild utility and press Y to confirm and
restart the computer.
You have successfully created a new RAID logical drive.
You must be partition and format your new logical drive before you
can use it. Use the same method of partitioning and formatting a
logical drive as you would any other fixed disk added to your
computer system.
Step 4: Create a Logical Drive
Important
11